Not only are lath and plaster walls sturdy, but they also provide better insulation than drywall, which can translate into savings on your energy bill. This combination provides an even finish and is much more sturdy than drywall. Lath and plaster walls are a combination of wooden laths (strips of wood) and a plaster mixture that is troweled onto the laths. If you’re planning to hang a heavy mirror on your lath and plaster wall, it is important that you understand how this type of wall works. Hanging a heavy mirror on a lath and plaster wall requires the use of the correct tools and hardware to ensure the mirror stays securely in place What Is Lath and Plaster? We’ll share some tips for doing it correctly so that your mirror is firmly secured for years to come. In this article, we’ll walk you through the steps of hanging a heavy mirror on lath and plaster walls, so that you can get your decor finished in no time. ![]() With the proper tools and preparation, it can be done quickly and securely. Be as thorough as possible.Are you ready to hang up your heavy mirror but don’t know how? If you’re dealing with lath and plaster walls, it can be a bit intimidating.ĭon’t fear! Hanging a heavy mirror on a lath and plaster wall doesn’t have to be overwhelming or difficult. Use a dry non-abrasive washcloth to wipe away all the moisture on your wall, using a circular motion again.Rinse the cloth in warm water, then use it to wipe away any soap residue on the wall.Rub the area of your wall down with your soapy cloth.Work the soap into a small patch of suds on the cloth. Soak a non-abrasive washcloth in warm water, then place a bead of mild soap on the cloth.There are a few different ways you can clean plaster, but the simplest is to use warm water and mild liquid dish soap.As such, drying the wall after washing it is twice as important. Thoroughly drying the wall is important for the sake of the adhesive, but plaster is also fairly porous, so mildew and similar problems may develop if you allow it to stay damp.Adhesive glue will not stick to a surface that is dirty or dusty.Dry the plaster thoroughly when finished. Before you attach an adhesive to a plaster wall, you need to clean the surface of the plaster to strip away any oils and dirt. Note that there are also anchors made from fiber, wood, and metal, however, so you have a range of options to choose from. Plastic anchors are among the most common and will usually suffice for this project.This sleeve also minimizes the amount of stress put on the plaster. As a result, the screw will sit more securely inside the wall. Wall anchors consist of a sleeve that expands into the wall once you drive a screw into it.Note that the anchor should also be flush with the wall.The anchor needs to be snug and straight inside the wall. If the anchor starts bending, you should take it out and make the hole a little larger. ![]() If your hole is not large enough, a plastic anchor will bend. ![]() Remove the tape covering your hole before hammering the anchor inside.Tap the anchor into the hole, using just enough force to drive it in without bending the anchor or cracking the wall. Place the anchor directly over the hole in your wall.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |